1. Operation process


1) The POWER switch is turned on. (1)

After the body right, surface figure

2) OUT The volume of the speaker for the guest is adjusted
with a SP volume adjustment vessel. (2)

3) IN The volume of the speaker for the person in charge is adjusted
with a SP volume adjustment vessel. (3)

Body bottom figure


Because volume adjustment is done at the time of the installation, ONE of the POWER switch is only usually turned off, and it can be used.



The attention of handling
-The settlement of the volume can adjust four steps which grows big in order of 1 - 4.
(Turn off the number which isn't used.)
-Use the settlement of the volume with 1 or 2.
At this time, be sure to leave a speaker from the microphone beyond 5 cm.
-Take 3, and use it when it thinks that volume is still small.
At this time, be sure to leave a microphone from the speaker beyond 30 cm.

"Wish"

Give me a story from two languages after a guest finishes speaking because these goods are voice automatic changeover forms.
It causes the head piece of the word.


Instruction manual contents

When a voice doesn't come out.

It is returned to the product guidance.