ITV control vessel


Function and characteristics

1. An image from the camera is changed automatically one after another,
and it can be reflected to the monitor.
The time of automatic switching can be set up
in every 1 second until 1-15 seconds.

2. It is with a skip function to jump over the unnecessary camera image and to change.

3. A changeover movement stops by pushing the STOP
switch of the operation board at the time of automatic switching,
and it can keep watching only the camera
which it is reflected to at that time.
Furthermore, it can be changed to one previous camera or the next camera
by pushing the switch which E to be returned proceeds through, too.
When a STOP switch is pushed again, it is returned for the automatic changeover movement.

4. The image of the camera which it wants to see by pushing the hand-operated
changeover switch of the operation board at the time of hand-operated switching can be chosen.

5. The number of the camera which it is reflected to at present is indicated with LED in the operation board.

6. The disorder of the image in switching disappears because it synchronizes on the images of the camera connected
by connecting it with the synchronous output of the camera
control vessel when there is synchronous signal input in the camera.

7. A control line is unnecessary because it has the rising one above another done
by the same shaft line at the control signal.

8. There are a few amounts of cable, and wiring of the same shaft line is finished, and it can save construction expenses, too,
because a rosary is connected with the next camera with this system from the camera
and done though the operation board of each camera was connected respectively with a usual system as to it.

9. The control of the electromotive style cloud base and the zoom lens becomes possible, too.
Because it has the rising one above another done by the same shaft line, the control signal of that case doesn't need to add a cable for the control signal separately like a usual system, either.
(But, an optional control vessel is necessary.)


Outline

How to set it up

It is returned to the product guidance.