5. handling explanation

1. Preparation

1. The line of the child opportunity speaker is connected to the terminal department SP1 - 10.

2. The line of the child opportunity push button is connected to the terminal department STG1 - 10.

3. The connector of The toque background device and the terminal part is connected.

4. A marching in place switch is connected. (With the relay outlet)

5. A microphone is connected.

6. A power cord is connected to the AC outlet. A (AC100V indicator lamp is turned on.)

7. Push down the switch of the power supply on the "on" side. The lamp of (DC24V is turned on.)

2. Operation

1. Call from the child machine

1. The switch of the child machine is called.

2. The lamp of the telephone call lines is turned on in the parents machine, and call sound rings.

3. When a switch under the lamp turned on is pushed down in the top, it becomes telephone call condition, and a lamp takes its place of continuous lighting.

4. It steps on the marching in place switch, or a body front panel "call sound, transmission" and a switch are pushed down on the "transmission" side, and transmission from the parents machine is done.

5. The transmission switch (A marching in place switch is the same, too.) of the parents machine is pushed down, and transmission is told, and the operation to do story from the child machine is repeated, and a telephone call is done.

6. Return a circuit choice switch in the position of the cause if you finish a telephone call. An indicator lamp turns off the lights.

2. From the parents machine, the call of the child machine

1. The circuit switch which a call is given to is pushed down in the upside, and a "call sound, transmission" switch is pushed down in, the "call sound" side. A lamp on the (circuit switch is turned on.)

2. Call sound rings more than the speaker of the child machine who has a circuit specified.

3. Refer to "1. call from the child machine" after the above.

3. General call

1. Push down a "general" switch in the top, and push down a "call sound, transmission" switch on the "call sound" side.

2. Refer to "1. call from the child machine" after the above.

Machine composition

Trouble diagnosis table

It is returned to the product guidance.