How to set each timer

A switch inside the automatic control circuit board

2. How to set power supply ON/ off

It does with SW9 of ( the figure 1 ) and SW10.

-1. When SW10 is pushed in the same way, the following menu comes out in the LCD indication vessel.

1.POWER ON/ off
2.At night, volume
3.TIME

-2. SW10 is pushed, and the next indication when 1. should be chosen comes out.

*POWER ON/ off*
[00:00-00:00]

-3. Put a number with SW9.
Push SW10, and move a cursor, and put a number in the same method to 0 at the end, and set it if you come in.

-4. Push SW10 after you finish the above set. It is set completion.
Time is indicated on the bottom right of the LCD indication vessel at present.